L50(300)A-IPL Medium Power Thermal Sensors for Intense Pulsed Light IPL

L50(300)A-IPL

Ophir Medium Power Thermal Sensors for IPL

產品型號：L50(300)A-IPL
產品說明：

L50(300)A-IPL sensor for air or gel measurements. This sensor measures pulses from IPL dermatological sources. It has a 65mm aperture with a glass window allowing measurement thru air or using gel. It can measure energy from 120mJ to 1000J. It has the high damage threshold LP2 absorber and covers the spectral range from 0.5 to 1.3µm. The sensor comes with a standard 1.5 meter cable for connecting to a meter or PC interface.

價格(NTD)：$0

產品說明

Model Use	L50(300)A-IPL Gel and Air coupled IPL and laser sources
Absorber Type	LP2 + coated window (a)
Spectral Range	0.5 - 1.3 µm
Absorption	86%
Aperture	Ø65mm
Power Mode
Power Range	400mW - 300W
Maximum Intermittent Power	300W for 2 min 150W for 4.5min 50W continuous
Power Scales	300W / 30W
Power Noise Level	20mW
Maximum Average Power Density	17kW/cm² at 300W 50kW/cm² at 50W
Response Time with Display (0-95%) typ.	3 s
Calibration Uncertainty	±1.9%
Power Accuracy	±6% for most gel or air coupled IPL sources
Linearity with Power	±1%
Energy Mode
Energy Range	120mJ - 1000J
Energy Scales	1000J / 600J / 60J / 6J
Minimum Energy	120mJ
Damage Threshold	Maximum Energy Density J/cm²
<100ns	0.1
1µs	0.9
0.5ms	50
2ms	130
10ms	400
Energy Accuracy	±8% for gel coupled source (c) ±5% for air coupled source
Cooling	convection / ballistic
Weight	1 kg
Part number	7Z02780
Note: (a) Sensor has a window for gel coupled IPL sources where IPL source is coupled to window with gel or water for measurement. Can also measure air coupled IPLs (b) If the source is longer than the aperture, it can overfill and the output can be calculated proportionately.
(c) The assumed angular distribution of the IPL light is given below. The angle dependence of the LP2 coating is shown below.