L50(150)A-PF-35 Low-Medium Power Thermal Sensors for Short Pulse Lasers

L50(150)A-PF-35

產品型號：L50(150)A-PF-35
產品說明：

The L50(150)A-PF-35 is a thermal power/energy laser measurement sensor for high peak power pulsed lasers. It has a 35mm aperture and can measure from 100mW to 150W intermittently and to 50W continuously. It measures energy from 50mJ to 300J. It has a damage threshold of up to 3J/cm² for ns pulses and covers the spectral range from 0.15 to 20µm. The sensor comes with a standard 1.5 meter cable for connecting to a meter or PC interface.

價格(NTD)：$0

產品說明

Model Use	L50(150)A-PF-35 Short pulse lasers
Absorber Type	PF
Spectral Range	0.15-20 µm
Absorption	>85%
Aperture	Ø35mm
Power Mode
Power Range	100mW - 150W
Maximum Intermittent Power	150W for 1.5min 100W for 2.5min 50W continuous
Power Scales	150W / 50W /5W
Power Noise Level	4mW
Maximum Average Power Density	3
Response Time with Meter (0-95%) typ.	2s
Calibration Uncertainty	±1.9%
Power Accuracy	±4% (d)
Linearity with Power	±1%
Energy Mode
Energy Range	50mJ - 300J
Energy Scales	300J / 30J / 3J
Minimum Energy	50 mJ
Maximum Energy Density J/cm2	Single (e)	10-50Hz (e)
<100ns	3 (f)	1.5
0.5ms	7	7
2ms	15	15
10ms	40	40
Cooling	convection / ballistic
Fiber Adapters Available	ST, FC, SMA, SC
Weight	0.35 kg
Part number	7Z02737
Note: (d) Calibrated for 0.25 – 2μm, 10.6μm (e) For 10-50Hz, derate as follows: Wavelength Derate to value 1064nm Not derated 532nm Not derated 355nm 70% of stated value 266nm 15% of stated value 193nm 10% of stated value (f) Damage threshold 1.5J/cm2 for wavelengths <500nm