30(150)A-SV-17 Low-Medium Power Thermal Sensors for High Power and Energy Density

30(150)A-SV-17

產品型號：30(150)A-SV-17
產品說明：

The 30(150)A-SV-17 is thermal power/energy laser measurement sensor with high damage threshold for both power and energy. It has a 17mm aperture and can measure from 100mW to 30W continuously and to 150W intermittently. It can measure energy from 50mJ to 300J. Its SV absorber has a damage threshold of 1J/cm² and 60kW/cm² for repetitive pulses and covers the spectral range from 0.19 to 12µm. The sensor comes with a standard 1.5 meter cable for connecting to a meter or PC interface.

價格(NTD)：$0

產品說明

Model Use	30(150)A-SV-17 High repetition rate pulsed lasers for material processing
Absorber Type	SV
Spectral Range	0.19 - 11 µm
Aperture	Ø17mm
Power Mode
Power Range	100mW - 150W
Maximum Intermittent Power	150W for 1.5min 100W for 2.2min 30W continuous
Power Scales	150W / 30W / 3W
Power Noise Level	5mW
Maximum Average Power Density	60 kW/cm² at 150W
Pulsed Maximum Average Power Density (e)	100 kW/cm2 at 25W for ns pulses 20 kW/cm2 at 20W for ps pulses
Response Time with Meter (0-95%) typ.	1.7 s
Calibration Uncertainty	±1.9%
Power Accuracy	±3%
Linearity with Power	±1%
Energy Mode
Energy Range	50mJ - 300J
Energy Scales	300J / 30J / 3J
Minimum Energy	50 mJ
Maximum Energy Density J/cm²	Pulse width (a)
	<100ns	1
	0.5ms	20
	2ms	50
Cooling	convection / ballistic
Fiber Adapters Available	ST, FC, SMA, SC
Weight	0.3 kg
Part number	7Z02724
Note: (a) At 1064nm. For shorter wavelengths derate maximum energy density to: 355nm 50% of above values 266nm 50% of above values (for CM type 30% of above values) 193nm 10% of above values (b) With diffuser in, sensor is only calibrated for 1064nm, 532nm and 355nm wavelengths (c) The sensor is only calibrated in the spectral range 0.25-2.2μm (d) At 1064nm (e) For repetition rates ≥100kHz